Bucketlist Trading Private Limited

   It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for cars, motorcycles, boats, water dispensers, industrial machinery, etc.

• Model Name: Illuminated Rocker Switch;

• Contact Type: ON-OFF (DPST); Terminals: 4;

• Material Type: Plastic; Marked on the rocker: I/O (on/off) for precise indications

• Voltage Rating: 16A 220V AC or 20A 125V

• Indicator color: Blue

Additional Information:

• Item Code: SW033-SQUARE-BLUE-250V-4PIN
• Delivery Time: 2 - 4 days

   It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for cars, motorcycles, boats, water dispensers, industrial machinery, etc.

• Model Name: Illuminated Rocker Switch;

• Contact Type: ON-OFF (DPST); Terminals: 4;

• Material Type: Plastic; Marked on the rocker: I/O (on/off) for precise indications

• Voltage Rating: 16A 220V AC or 20A 125V

• Indicator color: Yellow

Additional Information:

• Item Code: SW034-SQUARE-YELLOW-250V-4PIN
• Delivery Time: 2 - 4 days

   It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for cars, motorcycles, boats, water dispensers, industrial machinery, etc.

• Model Name: Illuminated Rocker Switch;

• Contact Type: ON-OFF (DPST); Terminals: 4;

• Material Type: Plastic; Marked on the rocker: I/O (on/off) for precise indications

• Voltage Rating: 16A 220V AC or 20A 125V

• Indicator color: Green

Additional Information:

• Item Code: SW032-SQUARE-GREEN-250V-4PIN
• Delivery Time: 2 - 4 days

   It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for cars, motorcycles, boats, water dispensers, industrial machinery, etc.

• Model Name: Illuminated Rocker Switch;

• Contact Type: ON-OFF (DPST); Terminals: 4;

• Material Type: Plastic; Marked on the rocker: I/O (on/off) for precise indications

• Voltage Rating: 16A 220V AC or 20A 125V

• Indicator color: Black

Additional Information:

• Item Code: SW035-SQUARE-BLACK-250V-4PIN
• Delivery Time: 2 - 4 days

   It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for cars, motorcycles, boats, water dispensers, industrial machinery, etc.

• Model Name: Illuminated Rocker Switch;

• Contact Type: ON-OFF (DPST); Terminals: 4;

• Material Type: Plastic; Marked on the rocker: I/O (on/off) for precise indications

• Voltage Rating: 16A 220V AC or 20A 125V

• Indicator color: Red

Additional Information:

• Item Code: SW031-SQUARE-RED-250V-4PIN
• Delivery Time: 2 - 4 days

• Model Name: Illuminated Rocker Switch

• Contact Type SPST, ON-OFF

• Material Type: Plastic

• Voltage Rating: 220V AC

• Color: Yellow

Additional Information:

• Item Code: SW012-220V-SPST-FULL-YELLOW
• Delivery Time: 2 - 4 days

It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for many cars, motorcycles, boats, water dispensers, etc.

• Color: Yellow; Rated at 12V

• Material: Plastic

• Light source: LED

• Fits a 2cm/20mm Hole

• Size (H * W): 2.7 x 2.2cm / 1.06" x 0.86" (approx)

Additional Information:

• Item Code: SW004-12V-SPST-FULL-YELLOW
• Delivery Time: 2 - 4 days

It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for many cars, motorcycles, boats, water dispensers, etc.

• Model Name: Illuminated Rocker Switch

• Contact Type SPST, ON-OFF

• Material Type: Plastic

• Voltage Rating: 220V AC

• Indicator color: Please choose from the variation

Additional Information:

• Item Code: SW009-220V-SPST-FULL-RED
• Delivery Time: 2 - 4 days

These round rocker switches are very useful for projects, the switch has three 4.8mm terminals (Pos, Acc, Neg). When switched to ON the switch will illuminate

• Color: Green; Rated at 12V

• Material: Plastic

• Light source: LED

• Fits a 2cm/20mm Hole

• Size (H * W): 2.7 x 2.2cm / 1.06" x 0.86" (approx)

Additional Information:

• Item Code: SW002-12V-SPST-FULL-GREEN
• Delivery Time: 2 - 4 days

It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for many cars, motorcycles, boats, water dispensers, etc.

• Model Name: Illuminated Rocker Switch, the backlit is LED powered by the same 12V power source

• Connection / Poles Type : SPST (Single Pole Single Throw); Terminals Number: 3 Pins; Positions Number: 2 Positions (ON/OFF); 2 pole (On/Off) 3rd pole with LED to be connected to earth

• Material Type: ABS Plastic; Mounted Hole Size: 20mm; Color: Black, Yellow;

• Voltage Rating: 12V DC; Max Current Rating: 20A; Operating Current Rating: 16A; Operating Temperature: -25C - +85C;

• Package Quantity: 1 pcs; Please note the Switch is for DC, not suitable for AC.

Additional Information:

• Item Code: SW024-12V16A-ROUND-YELLOWDOT
• Delivery Time: 2 - 4 days

These round rocker switches are very useful for projects, the switch has three 4.8mm terminals (Pos, Acc, Neg). When switched to ON the switch will illuminate

• Model Name: Illuminated Rocker Switch

• Contact Type SPST, ON-OFF

• Material Type: Plastic

• Voltage Rating: 220V AC

• Color: Green

Additional Information:

• Item Code: SW010-220V-SPST-FULL-GREEN
• Delivery Time: 2 - 4 days

• Model Name: Illuminated Rocker Switch

• Contact Type SPST, ON-OFF

• Material Type: Plastic

• Voltage Rating: 12V

• Color: Red

Additional Information:

• Item Code: SW022-12V16A-ROUND-REDDOT
• Delivery Time: 2 - 4 days

• Color: Black and Red
• Quantity: 1 pc
• Standard Rating: DC12V/5A
• Cable Length: 65cm
• Universal handlebar design, can be fit on most of motorcycles (bikes and scooters)
• Connection: Black wire is for the turning right light, blue wire is for the turning left light, red wire is for the flasher output (shouldn't be apart of your car again turn signal switch, see inside 3 wires, corresponding to plug in, turn signal switch input point after we switch between the lines, the other two respectively connected to it)
• Can be used as ON/OFF switch for general lights, hazard light, and power outlet for mobile devices
• Can be used on motorcycles, ATVs, scooters, or snowmobiles
• Cable Length: 18cm (approx); Standard Rating: DC12V-24V / 5A

Additional Information:

• Item Code: SW025-DUAL-FLASH
• Delivery Time: 2 - 4 days

• Rating:16A 250V Mounting hole diameter:20-22mm

• Poles: SPDT (Single Pole Double Throw) 

• Terminal:4-Pin

• Contact Resistance:35mÎ max.

• Insulation Resistance:‰¥100MÎ at 500VDC

• Dielectric Strength:1500VAC for 1 minute

• Operating Temperature:-25C- +85C

• Electrical Life:10000 Cycles

• Size (H*W):2.7x2.2cm/1.06"x0.86"(approx)

• Rating:16A 250V

• Mounting hole diameter:20-22mm

• Poles: SPDT (Single Pole Double Throw)

• Terminal:4-Pin

• Contact Resistance:35mΩ max.

Additional Information:

• Item Code: SW031-SQUARE-FULLRED-250V-4PIN
• Delivery Time: 2 - 4 days

• Module-based on: DUAL MOSFET; The delay time is 0.1 seconds (min) to 999 minutes (max) continuously adjustable

• Operating voltage: 5--36V; Quiescent Current: 20mA; Operating Current: 50mA; The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature, operating current of up to 15A, power up to 400W

• Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system's anti-jamming capability (customers can also shorting common ground)

• Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Enhance heat dissipation conditions, the maximum current up to 30A

• Working temperature: -40-85 ; Size: 6.0*3.4*1.2cm; With optocoupler isolation, reverse polarity protection, enhanced anti-jamming capability, industrial-grade board

• P1: trigger signal, the relay is on "OP" time, and then disconnect; in the "OP" time, as follows:

• P1.1: the signal is triggered again, invalid

• P1.2: the signal is triggered again, the clock is reset

• P1.3: Signal trigger again, relay off, stop the clock;

• P-2: trigger signal, the relay off "CL" of time, the relay on "OP" time, and then disconnect relay;

• P3.1: trigger signal, the relay is turned on after the "OP" time, the relay off "CL" time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( "LOP ") can be set.

• P3.2: without triggering signal, the relay is on "OP" time, the relay off "CL" time, and has been cycling; frequency ( "LOP") cycle can be set;

• P-4: signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing "OP" time, the relay is; if another signal during timing, timing is cleared;

• The module is an active output, the output voltage equal to the input voltage.' DC + 'and' load + '
• This is an internal short circuit of the poles, but' DC- 'and' load - 'poles during use can not be shorted, otherwise the load can not be controlled on and off, which is equivalent load is been carrying electricity.

Additional Information:

• Item Code: SWD002-T-DLY-MOS-DISP
• Delivery Time: 2 - 4 days

These round rocker switches are very useful for projects, the switch has three 4.8mm terminals (Pos, Acc, Neg). When switched to ON the switch will illuminate

• Color: Blue; Rated at 12V

• Material: Plastic

• Light source: LED

• Fits a 2cm/20mm Hole

• Size (H * W): 2.7 x 2.2cm / 1.06" x 0.86" (approx)

Additional Information:

• Item Code: SW003-12V-SPST-FULL-BLUE
• Delivery Time: 2 - 4 days

It can be used for the additional electrical equipment inside or outside the car, such as flashing lights, chassis lights, and dome lights. - Built-in neon light, easy to install. - Multiple protection, safe and durable. - Application for many cars, motorcycles, boats, water dispensers, etc.

• Model Name: Illuminated Rocker Switch, the backlit is LED powered by the same 12V power source

• Connection / Poles Type : SPST (Single Pole Single Throw); Terminals Number: 3 Pins; Positions Number: 2 Positions (ON/OFF); 2 pole (On/Off) 3rd pole with LED to be connected to earth

• Material Type: ABS Plastic; Mounted Hole Size: 20mm; Color: Black, Yellow;

• Voltage Rating: 12V DC; Max Current Rating: 20A; Operating Current Rating: 16A; Operating Temperature: -25C - +85C;

• Package Quantity: 1 pcs; Please note the Switch is for DC, not suitable for AC.

Additional Information:

• Item Code: SW021-12V16A-ROUND-BLUEDOT
• Delivery Time: 2 - 4 days

• Color: Black and Red

• Quantity: 1 pc

• Standard Rating: DC12V/10A

• Handlebar Install Diameter: about 22~25mm or 7/8"

• Cable Length: 65cm

• Universal handlebar design can be fit on most of the motorcycles (bikes and scooters)

• Handlebar Install Diameter: about 22~25mm or 7/8"; With two connectors, easy to install

• Can be used as ON/OFF switch for general lights, hazard light, and power outlet for mobile devices

• Can be used on motorcycles, ATVs, scooters, or snowmobiles

• Cable Length: 50 to 70cm; Standard Rating: DC12V/10

Additional Information:

• Item Code: SW026-HANDLE-SWITCH
• Delivery Time: 2 - 4 days

• Model Name: Illuminated Rocker Switch

• Contact Type SPST, ON-OFF

• Material Type: Plastic

• Voltage Rating: 220V AC

• Color: Blue

Additional Information:

• Item Code: SW011-220V-SPST-FULL-BLUE
• Delivery Time: 2 - 4 days

• Model Name: Illuminated Rocker Switch

• Contact Type SPST, ON-OFF

• Material Type: Plastic

• Voltage Rating: 12V

• Color: Green

Additional Information:

• Item Code: SW023-12V16A-ROUND-GREEN-DOT-1
• Delivery Time: 2 - 4 days

• T1 = 1, T2 = 1 corresponding: LED touch step-less dimming without brightness memory

• T1 = 0, T2 = 1 corresponding: LED touch step-less dimming function without brightness Memory fading

• T1 = 1, T2 = 0 corresponding: LED touch step-less dimming function with brightness Memory fading

• T1 = 0, T2 = 0 corresponding: led three touch dimming function

• when the touch is clicked (the touch duration is less than 550ms), the light on/off control can be realized. Once click touch, the light is on; once click touch, the light is off. This cycle. When the light is on or off, there is no brightness buffer. And the initial brightness of the light is fixed at 50% of the full brightness.

• Press and hold the touch for more than 550ms to gradually increase the brightness of the light. When released, it stops at the brightness corresponding to the release time. If the press for a long time is more than 3 seconds, the brightness of the light will not change after reaching the maximum brightness.

• Click the touch to turn on and off the light, the light smoothly reduces from the current brightness until it is turned off It can achieve the visual buffering effect of slowly changing brightness and protect the eyes and vision.

• Under continuous power supply, the brightness will be memorized each time turn off the light, and the next time you click the touch to turn on the light, the brightness will be used as the initial brightness. In case of power failure, the first time after power on, click touch to turn on the light, and the initial brightness is fixed at 50% of the full brightness.

• LED three touch dimming function: Click the touch, the light brightness is in the order of low brightness → medium brightness → high brightness → off

If it is triggered by mistake or not during debugging, it

• Installation: without direct contact with copper foil, dimming can be carried out by more than 3mm acrylic glass or plastic.

• Voltage range:2.4-5V; Maximum output current:500MA; Hole distance:16MM; Aperture:2.5MM

• Function: single line touch, using the principle of capacitive touch, sensitive touch. By default, it has switch function, dimming function and stepless dimming function of LED touch with brightness memory. Turn on the light slowly, turn off the light slowly dark, effectively avoid eye irritation.

• Wiring mode: in PCB board (VCC, GND) is the power input, (LED +, led -) is led lamp positive and negative (fingerprint) is touch area, and it can also be wired out (note that the wiring should not be too long, after the outgoing line, it is recommended to use a small copper sheet as the sensing area), and the copper sheet area is recommended to be 2x3cm left and right. The copper foil module on the board pastes one side of the copper foil on the shell side.

• Dimming mode: stepless PWM dimming; Initial powered on, the lamp is off.

Additional Information:

• Item Code: SWT006-PWM-CV-DIMMER
• Delivery Time: 2 - 4 days