Bucketlist Trading Private Limited

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC062-PLASTIC-6mm-PY
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC081-PLASTIC-10mm-PE
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC073-PLASTIC-8mm-PM
• Delivery Time: 2 - 4 days

28 x 28 x 10mm 28mm Heat sink Aluminum Heatsink Cooler For Led Light Graphic card Amplifier Peltier

• Aluminum Heatsink; Tooth number: 13 Tooth thickness:1.1mm; Baseplate thickness:2.2mm
• Size:28mm*28mm*10mm (10mm height)
• Weight: 7g
• packing include: 1 pcs: Fits perfectly for 30mm Peltier
• Suitable for: Computer motherboard chip, memory chip and card small chip, all kinds of computer electronic chip auxiliary heat.

Additional Information:

• Item Code: HC098-28X28X10-BLACK-3M
• Delivery Time: 2 - 4 days

• Condition:100% New
• Size:40x40x12mm
• Material:Aluminum
• Brazing parts into a whole; 7mm internal flow tubes
• Nozzle: 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC010-40MM-SILVER-HORI
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC076-PLASTIC-8mm-HVFF
• Delivery Time: 2 - 4 days

• Condition:100% New; Pack of 8pcs 1 for each IC in RAM
• Material: Aluminum
• Exteral Size: 15*15*8mm
• Package: 8pcs\lot
• Use for electronic ,LED ,IC,CPU,GPU,CPU,RAM,CHIPcomputer 's component heat dissipation .               

Additional Information:

• Item Code: HC036-1508-3M-CROSS-BLUE
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC074-PLASTIC-8mm-PZA
• Delivery Time: 2 - 4 days

• Heatsink Material:Copper, Noise:21dBA, Air Volume:30CFM,
• Lines:2 Lines, Power:1.56W, Power Interface:2PIN
• Mounting Hole Distance: 55mm.
• 11 blades,super long wire. Bearing:Fluid Bearing
• Fan Life:30000 hrs,               

Additional Information:

• Item Code: HC021-55MM-HSINK-FAN
• Delivery Time: 2 - 4 days

This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk. CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc

• Thermal Conductive coefficient: 400W/(m.K)

• With this copper pad to greatly lower GPU temperatures, it can be used for Graphics card, northbridge, CPU chips.

• It can be applied to HP, Dell, Acer, Thinkpad, and all laptops and computer heatsink solutions!

• Please clean the surface of your chipsets and heatsink and be sure no rest compound in it.

• Please be sure you have painted the silicone grease when fixing the heatsink.

• Please be more patient when doing it.

• There is a gap of more than 2mm between the GPU and the cooling module. In this space, hardware manufacturers fill the gap with a piece of heat-conducting glue (blue) and conduct heat. However, due to the long working time under high temperature, the thermal conductivity of the glue will gradually lose due to its aging, this copper shim is a wonderful substitute for the gap.

• Thickness: 1mm

• Material: Pure copper

• Exteral Size: 20 (L) *20 (B) mm

• Package: 10pcs\lot

• Use for electronic ,LED ,IC,CPU,GPU,CPU,RAM,CHIPcomputer 's component heat dissipation .

Additional Information:

• Item Code: HC051-20MM-1MM-COPPER
• Delivery Time: 2 - 4 days

Heatsink with Fan and mounting screws. Suitable for Northbridge and southbridge motherboard chip, LED Driver, Motor control board, Peltier etc...

• Voltage: DC 12V
• Rated Current:0.055A
• DC Fan Noise Level: <23dBA±10%, Air Flow:6.27CFM, Bearing: Sleeve Bearing
• Aluminum Heatsink Size:37(L)x40(W)x45(H) MM
• Color:Golden

Additional Information:

• Item Code: HC034-4037-WITH-FAN
• Delivery Time: 2 - 4 days

15*10*20MM Triode Heat Sink 10*15*20MM TO-220 TO220 Transistor Aluminum Radiator Heat Sink Cooler Cooling 20*15*10MM

• Black Anodised Aluminium Heatsink with Fins for Triod, IC, IGBT, MOSFET, etc.

• Size: 20MM (Length) x 15MM(Breadth) x 10MM (Thickness)

Additional Information:

• Item Code: HC024-FINS-BLACK
• Delivery Time: 2 - 4 days

• Condition:100% New

• Material:Aluminum

• Exteral Size:50x50x11mm

• Package:1pcs/lot

Additional Information:

• Item Code: HC020-5011-BLACK
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC060-PLASTIC-6mm-PU
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC075-PLASTIC-8mm-PK
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC061-PLASTIC-6mm-PV
• Delivery Time: 2 - 4 days

Additional Information:

• Production Capacity: 10000
• Delivery Time: 10

Extruded Aluminum heatsink 14x14x6mm with thermal 3M adhesive, Chip CPU GPU VGA RAM LED IC radiator, COOLER. You can stick it directly on the chip, however it is best when used along with thermal paste/grease/compound.

• Condition:100% New
• Material: Aluminum Gold plated
• Exteral Size: 14*14*6mm
• Package: 5 pcs
• Use for electronic ,LED ,IC,CPU,GPU,CPU,RAM,CHIPcomputer 's component heat dissipation .               

Additional Information:

• Item Code: HC037-1406-3M-STRT-GOLD
• Delivery Time: 2 - 4 days

This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk.

CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc

• Thermal Conductive coefficient: 400W/(m.K)

• With this copper pad to greatly lower GPU temperatures, it can be used for Graphics card, northbridge, CPU chips.

• It can be applied to HP, Dell, Acer, Thinkpad, and all laptops and computer heatsink solutions!

• Please clean the surface of your chipsets and heatsink and be sure no rest compound in it.

• Please be sure you have painted the silicone grease when fixing the heatsink.

• Please be more patient when doing it.

• There is a gap of more than 2mm between the GPU and the cooling module. In this space, hardware manufacturers fill the gap with a piece of heat-conducting glue (blue) and conduct heat. However, due to the long working time under high temperature, the thermal conductivity of the glue will gradually lose due to its aging, this copper shim is a wonderful substitute for the gap.

• Thickness: 0.3mm/0.5mm//0.8mm/1mm/1.2mm/1.5mm

• Material: Pure copper

• Exteral Size: 20 (L) *20 (B) mm

• Package: 10pcs\lot

• Use for electronic ,LED ,IC,CPU,GPU,CPU,RAM,CHIPcomputer 's component heat dissipation .

Additional Information:

• Item Code: HC049-20MM-1.2MM-COPPER
• Delivery Time: 2 - 4 days

This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk. CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc

• Thermal Conductive coefficient: 400W/(m.K)

• With this copper pad to greatly lower GPU temperatures, it can be used for Graphics card, northbridge, CPU chips.

• It can be applied to HP, Dell, Acer, Thinkpad, and all laptops and computer heatsink solutions!

• Please clean the surface of your chipsets and heatsink and be sure no rest compound in it.

• Please be sure you have painted the silicone grease when fixing the heatsink.

• Please be more patient when doing it.

• There is a gap of more than 2mm between the GPU and the cooling module. In this space, hardware manufacturers fill the gap with a piece of heat-conducting glue (blue) and conduct heat. However, due to the long working time under high temperature, the thermal conductivity of the glue will gradually lose due to its aging, this copper shim is a wonderful substitute for the gap.

• Thickness: 0.3mm

• Material: Pure copper

• Exteral Size: 20 (L) *20 (B) mm

• Package: 10pcs\lot

• Use for electronic ,LED ,IC,CPU,GPU,CPU,RAM,CHIPcomputer 's component heat dissipation .

Additional Information:

• Item Code: HC050-20MM-0.3MM-COPPER
• Delivery Time: 2 - 4 days

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts -
• Size: 200x40x12mm; Internal fin thickness 0.5MM
• Material: Aluminum; Surface treatment: silver oxidation
• Brazing parts into a whole; Processing: Vacuum aluminum brazing;
• Nozzle: 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC041-200MM-SILVER-HORI
• Delivery Time: 2 - 4 days

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts -
• Size: 120x40x12mm; Internal fin thickness 0.5MM
• Material: Aluminum; Surface treatment: silver oxidation
• Brazing parts into a whole; Processing: Vacuum aluminum brazing;
• Nozzle: 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC039-120MM-SILVER-HORI
• Delivery Time: 2 - 4 days

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts -
• Size: 160x40x12mm; Internal fin thickness 0.5MM
• Material: Aluminum; Surface treatment: silver oxidation
• Brazing parts into a whole; Processing: Vacuum aluminum brazing;
• Nozzle: 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC040-160MM-SILVER-HORI
• Delivery Time: 2 - 4 days

Suitable for computer CPU cooling,GPU,VGA,CHIP,industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts -
• Size: 280x40x12mm; Internal fin thickness 0.5MM
• Material: Aluminum; Surface treatment: silver oxidation
• Brazing parts into a whole; Processing: Vacuum aluminum brazing;
• Nozzle: 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC059-280MM-SILVER-HORI
• Delivery Time: 2 - 4 days

Suitable for computer CPU cooling,GPU,VGA,CHIP,industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Heat transfer mode: Recuperative heat exchanger

Specification: side export water

Water flow channel: double U channel

Size: 80*40*10mm/1.57*1.57*0.39inch

Outer diameter of water mouth: 8mm/0.31inch

Fitting hose: inner diameter of 7-8mm/0.28-0.31inch

Process: vacuum brazing

Surface treatment: polishing

Weight:125g

• Suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc
• Size: 80*40*10mm/1.57*1.57*0.39inch; Can be used to patch two 40mm Peltier in same Cooler
• Material: Aluminum
• The diameter of Internal flow channel is 6mm round hole channel; Integration of parts soldering; The leakage rate of parts is less than 5 x 10-6mbar.l/s
• Nozzle: 8 - 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC045-80MM-SILVER-HORI
• Delivery Time: 2 - 4 days

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts -

• Size: 30x30x12mm; Internal fin thickness 0.5MM

• Material: Aluminum; Surface treatment: silver oxidation

• Brazing parts into a whole; Processing: Vacuum aluminum brazing;

• Nozzle: 9.5MM, Can use for Inner dia 7mm-8mm water cooling pipe

• Suitable for computer CPU cooling, GPU, VGA, CHIP, industrial frequency conversion driver, laser head cooling, air conditioning evaporator, and industrial control cabinet cooling.

Additional Information:

• Item Code: HC038-30X30MM-SILVER-HORI
• Delivery Time: 2 - 4 days

• Thread: Coated Threads Fittings with external threads have a sealing layer, so you don't need to use any adhesivesPreferred material. 
• Retain tightness automatically after inserting the hose.
• Finish Resin Lock Claws: Stainless Steel.
• Fluid: Air - Water - Vacuum.
• Package Included: 1x Connector Fit For Tube .
• Material: PU/PE/Nylon, Polyurethane 
• Tube Connector Body: Acetal & Brass Nickel Plated
• Operating Pressure: 0-1 Mpa
• Negative Pressure: -750mmhg (10 Torr)
• Seal: NBR
• Operating Temperature: 0 to 60°C

Additional Information:

• Item Code: HC077-PLASTIC-8mm-PA
• Delivery Time: 2 - 4 days

•  Compatible CPU: Computer CPU GPU Application: Processor, Radiator for Peltier
• Type: Water Cooling; Model: Water Cooling Radiator; Heatsink Material: Aluminum
• Material: Aluminum Anadoised
• Suitable Water Tube Size: inner diameter 8-10 mm; Port: Straight Port
• Size: approx. 273 X 120 X 32 mm               

Additional Information:

• Item Code: HR007-240MM
• Delivery Time: 2 - 4 days

• Suitable for computer CPU cooling, GPU, VGA, CHIP, industrial frequency conversion driver, laser head cooling, air conditioning evaporator, and industrial control cabinet cooling.

• Heat transfer mode: Recuperative heat exchanger

• Specification: side export water

• Water flow channel: double U channel

• Size: 40*40*10mm/1.57*1.57*0.39inch

• The outer diameter of water mouth: 8mm/0.31inch

• Fitting hose: inner diameter of 7-8mm/0.28-0.31inch

• Process: vacuum brazing

• Surface treatment: polishing

• Weight:125g

• Suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc

• Size: 40*40*10mm/1.57*1.57*0.39inch

• Material: Copper

• The diameter of the Internal flow channel is 6mm round hole channel; Integration of parts soldering; The leakage rate of parts is less than 5 x 10-6mbar.l/s

• Nozzle: 8 - 9.5MM, Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC042-40MM-COPPER-HORI
• Delivery Time: 2 - 4 days

Suitable for computer CPU cooling, GPU, VGA, CHIP, industrial frequency conversion driver, laser head cooling, air conditioning evaporator, and industrial control cabinet cooling.

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts 

• Size: 240x40x12mm; Internal fin thickness 0.5MM

• Material: Aluminum; Surface treatment: silver oxidation

• Brazing parts into a whole; Processing: Vacuum aluminum brazing;

• Nozzle: 9.5MM, Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC058-240MM-SILVER-HORI
• Delivery Time: 2 - 4 days

Suitable for computer CPU cooling, GPU, VGA, CHIP, industrial frequency conversion driver, laser head cooling, air conditioning evaporator, and industrial control cabinet cooling.

Heat transfer mode: Recuperative heat exchanger

• Top export water

• Water flow channel: double U channel

• Size: 40*40*10mm/1.57*1.57*0.39inch

• The outer diameter of water mouth: 8mm/0.31inch

• Fitting hose: inner diameter of 7-8mm/0.28-0.31inch

• Process: vacuum brazing

• Surface treatment: polishing

• Weight:125g

• Suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc

• Size: 40*40*10mm / 1.57 * 1.57 * 0.39inch

• Material: Copper; Nozzle Direction: Top (Perpendicular to Base); Water Inlet and Outlet Positioned at the top

• The diameter of the Internal flow channel is 6mm round hole channel; Integration of parts soldering; The leakage rate of parts is less than 5 x 10-6mbar.l/s

• Nozzle: 8 - 9.5MM, Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC043-40MM-COPPER-TOP
• Delivery Time: 2 - 4 days

Suitable for computer CPU cooling,GPU,VGA,CHIP,industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

• Internal flow channel extrusion forming; Leak rate of less than 5X10-6 mbar.l/s parts -
• Size: 320x40x12mm; Internal fin thickness 0.5MM
• Material: Aluminum; Surface treatment: silver oxidation
• Brazing parts into a whole; Processing: Vacuum aluminum brazing;
• Nozzle: 9.5MM ,Can use for Inner dia 7mm-8mm water cooling pipe

Additional Information:

• Item Code: HC087-320MM-SILVER-HORI
• Delivery Time: 2 - 4 days