Mylasandra, Bengaluru, Karnataka
GST No. 29AAHCB3958J1Z6
Call 08048963885 78% Response Rate
Minimum Order Quantity: 5 Piece
Model Name/Number | SE171-GY-9250-MPU6500 |
Brand | CentIoT |
I Deal In | New Only |
Part no | SE171-GY-9250-MPU6500 |
Power supply | 3 V -5 V |
Gyro Range | +- 250 500 1000 2000 Degree / s |
Dimension | 2 x 1.5 x 0.5 cm |
Weight | 3 g |
The MPU-6500 is the company’s second-generation 6-axis MotionTracking device for smartphones, tablets, wearable sensors, and other consumer markets.
The MPU-6500, delivered in a 3x3x0.9mm QFN package, is the world’s smallest 6-axis MotionTracking device and incorporates the latest InvenSense design innovations for MEMS gyroscopes and accelerometers, enabling dramatically reduced chip size and power consumption, while at the same time improving performance and cost.
The new MPU-6500 addresses the market requirements for high-performance applications such as pedestrian navigation, context-aware advertising, and other location-based services, along with supporting the specifications for emerging wearable sensor applications such as remote health monitoring, sports and fitness tracking, and other consumer applications. 1 x 6DOF MPU 6500 Sensor 6-axis Gyroscope Acceleration Module SPI/IIC For Arduino
MPU-6500 modules (three-axis gyroscope + triaxial accelerometer)
Module Model: GY-6500
Power supply:3-5v (internal low dropout regulator)
Communication: Standard IIC / SPI communication protocol -Chip 16bit AD converter, the output data 16 Gyro range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g
Using Immersion Gold PCB, machine welding process to ensure quality 2.54mm pin pitch Module size 15mm * 25mm
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Brand | CentIoT |
Part Number | SE004-HC-SR501-PIR |
Model Name/Number | SE004-HC-SR501-PIR |
Weight | 7 g |
Operating voltage | DC 4.5-20V |
Quiescent current | less than 50uA |
Dimension | 3 x 2 x 3 cm |
sensor angle | less than 100 deg |
HC-SR501 is based on infrared technology, an automatic control module, using Germany imported LHI778 probe design, high sensitivity, high reliability, ultra-low-voltage operating mode, widely used in various auto-sensing electrical equipment, especially for battery-powered automatic controlled products.
Application:Automatically sensing light for Floor, bathroom, basement, porch, warehouse, Garage, etc, ventilator, alarm, etc
Adjustment:Adjust the distance potentiometer clockwise rotation, increased sensing distance (about 7 meters), on the contrary, the sensing distance decreases (about 3 meters). ??? Adjust the delay potentiometer clockwise rotation sensor the delay lengthened (300S), on the contrary, shortens the induction delay (5S).
Specification:Product Type: HC-SR501 PIR Motion/Proximity/Body/Human Sensor Module
Operating voltage range: DC 4.5-20V, Level output: High 3.3 V /Low 0V, Quiescent Current: <50uA
Lens size sensor: Diameter:23mm(Default)
Angle Sensor: <100 ° cone angle
Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger), Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second) Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Additional Information:
View Complete details
Minimum Order Quantity: 5 Piece
Brand | CentIoT |
Part Number | SE168-GY-61-ADXL335 |
Voltage | 2.5 V to 5.5 V |
Supply current | 8 mA |
Model no | SE168-GY-61-ADXL335 |
Dimension | 2 x 1.5 x 0.5 cm |
1 x 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino
Dimensions: 2 x 1.5 x 0.5 cm
Operating voltage: 2.5 V to 5.5 V
Supply current: 8mA
Output format (I2C/SPI)
Gyro: one 16-bit reading per axis, Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis, Barometer: 24-bit pressure reading (I2C only), Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g, Magnetometer: ±2, ±4, ±8, or ±12 gauss, Barometer: 300hPato 1110hPa
Additional Information:
View Complete details
Minimum Order Quantity: 20 Piece
Current Rating | 50 micro Ampere |
Usage/Application | Home |
Switch Type | Motion Sensor |
Brand | CentIoT |
Model Name/Number | SE174-PIR-220V-PANEL |
Shape | Round |
Power/Voltage | 40W |
Input Power | 40W |
Material | PVC |
Voltage | 220V |
Power Source | AC |
Dimensions | 25mm height x 20mm dia |
Weight | 20 g |
Small, lightweight, easy to install and operate, plug and play. Automatic ventilation exhaust fan and other electrical automatic control and other functions.
Auto switches on/off in the dark when you enter into the induction range, and it may have a 45s time delay.
Suitable for auto lighting corridors, corridor, bathrooms, basements, warehouses, garages, closet, advertisement lightbox, and other places.
Color: white; Output mode: sensor output
Working voltage: 100-240V; Load power: 40W; Static current: ??? 50μA
Time delay: 45s; Light control: 3Lux~6Lux
Material: PVC; Working temp: -20 ??? -+40 ???; Mounting Hole Size : 19mm (dia);
Induction angle: 110 ° cone shape; Induction distance: 4-6M; Please note the Switch is for AC, not suitable for DC.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Model Name/Number | AR087-5V-PAS-BUZZ-PCB |
Frequency | 50 ~ 14,000 Hz |
Brand | CentIoT |
Part Number | AR087-5V-PAS-BUZZ-PCB |
Weight | 3 g |
Size | 2 x 1 x 1 cm |
Operating Voltage | 3.3 V -5 V |
S8050 transistor drive modules
With fixed bolt hole for easy installation\
When the I / O port input high, the buzzer sounds Module Interface Description (3-wire) VCC external 3.3V-5V voltage (5v microcontroller can be directly connected 2.to the microcontroller and 3.3v) External GND GND
I / O external microcontroller IO port
Rated Voltage: 3 - 5V; Can be powered directly from Arduino 3.3V or 5V
Frequency Range : 50 ~ 14,000 Hz | Resonant Frequency2,048 Hz
Package dimension: Small PCB board size: 2 x 1 x 1 cm
Rated Current (MAX): 30mA Sound Output at 10cm with 2048Hz Square Wave ≥ 85 dB
Package included: 1 x Passive speaker buzzer module
Additional Information:
View Complete details
Minimum Order Quantity: 20 Piece
Usage/Application | Industrial |
Brand | CentIoT |
Part Number | SE167-GY-273-DB5883 |
Dimension | 1.8 x 1.3 cm |
Model no | SE167-GY-273-DB5883 |
Power supply | 3 V - 5 V |
Dimensions: 2 x 1 x 0.5 cm
Operating voltage: 2.5 V to 5.5 V
Supply current: 8mA
Output format (I2C/SPI):
Gyro: one 16-bit reading per axis
Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis
Barometer: 24-bit pressure reading (I2C only)
Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g
Magnetometer: ±2, ±4, ±8, or ±12
Gauss Barometer: 300hPato 1110hPa
1 x HMC5883L module (three-axis magnetic field module), I2C Address: 0x0D
Model: GY-273, Chip: HMC5883L, Communication: IIC communication protocol
Measuring range: ± 1.3-8 gauss
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Brand | CentIoT |
Part Number | SE170-GY-9150-MPU9150 |
Supply current | 8 mA |
Model no | SE170-GY-9150-MPU9150 |
Operating voltage | 2.5 V - 5.5 V |
Dimension | 2 x 1.5 x 0.5 cm |
1 x 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino
Dimensions: 22 mm × 17 mm, Operating voltage: 2.5 V to 5.5 V, Supply current: 8mA
Output format (I2C/SPI)
Gyro: one 16-bit reading per axis,
Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis,
Barometer: 24-bit pressure reading (I2C only),
Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g,
Magnetometer: ±2, ±4, ±8, or ±12 gauss
Barometer: 300hPato 1110hPa
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE017-GY-521-MPU6050 |
Number of Axes | 3 |
Supply Current | 8 mA |
Sensing Axis | XYZ |
Acceleration Range | 2-16 g |
Output Type | I2C |
Excitation Voltage | 2.5-5.5 V DC |
Dimension Mm | 22 mm x 17 mm |
Dimensions: 22 mm × 17 mm
Operating voltage: 2.5 V to 5.5 V
Supply current: 8mA
Output format (I2C/SPI)
Gyro: one 16-bit reading per axis
Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis
Barometer: 24-bit pressure reading (I2C only)
Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g
Magnetometer: ±2, ±4, ±8, or ±12
gauss Barometer: 300hPato 1110hPa
1 x 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino
Additional Information:
View Complete details
Usage/Application | For Arduino Smart Car Robot 3 wire Reflective Photoelectric |
Distance Measuring Range | 2 ~ 30cm |
Power | 3-5V DC |
Brand | CentIoT |
Model Name/Number | SE0016-IR-3WIRE |
Screw Holes | 3mm |
Dimension | 4.5 x 1.5 x 0.5 cm |
Model no | SE0016-IR-3WIRE |
Part no | SE0016-IR-3WIRE |
This sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit an infrared frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V.
The detection range of the sensor can be obtained by adjusting the potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
Power: 3-5V DC power supply. When the power is turned on, the red power indicator lights;
Screw holes: 3mm, easy fixed installation;
Board size: 3.2CM * 1.4CM
Comparators: LM393, stable;
Module Interface Description 1 VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU) 2 GND GND External 3 OUT small board digital output interface (0 and 1)
Additional Information:
View Complete details
Part Number | SE0039-DHT11-PCB-LED |
Brand | CentIoT |
Model Name/Number | SE0039-DHT11-PCB-LED |
Voltage | 3 to 5V |
Material | plastic |
Weight | 7 g |
I/O pins | 4 |
Dimension | 3.5 x 1.5 x 0.5 cm |
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more.
Model: DHT11 Temperature and Humidity sensor with PCB and LED indicators along with cable; 3 to 5V power and I/O, 4 pins with 0.1" spacing
The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
2.5mA max current use during conversion (while requesting data)
Good for 20-80% humidity readings with 5% accuracy
Good for 0-50°C temperature readings ±2°C accuracy
Additional Information:
View Complete details
Usage/Application | Temperature Measurement |
Part Number | SE038-DHT11 |
Brand | CentIoT |
Model Name/Number | SE038-DHT11 |
Weight | 5 g |
Dimension | 1.5 x 1 x 0.5 cm |
No of pins | 4 |
current | 2.5 mA |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Brand | CentIoT |
Sensor Type | Distance Sensor |
Sensing Distance | 2cm-450cm |
Model Name/Number | SE0019-HC-SR04 |
Voltage | DC 5V |
Weight | 9 g |
Sensing Range | 2cm-450cm |
current | Static current less than 2ma |
Part Number | SE0019-HC-SR04 |
Dimension | 4 x 2 x 1.5 cm |
Ultrasonic Module HC-SR04 Distance Measuring Transducer Sensor for Arduino
Working Voltage : 5V(DC).,High precision: Up to 0.3cm
Static current: Less than 2mA.
Output signal: Electric frequency signal, high-level 5V, low-level 0V., Input trigger signal: 10us TTL impulse
Sensor angle: Not more than 15 degrees.
Detection distance: 2cm-450cm.
Additional Information:
View Complete details
Minimum Order Quantity: 20 Piece
Brand | CentIoT |
Temperature Range | -50 to 110 deg cels |
Voltage | DC 12V |
Static current | less than 35MA |
supply voltage | DC 12V |
Model no | SE148-W1209-12V |
Part No | SE148-W1209-12V |
How to use: Connect the power supply and the load, you can supply to the controller, Is displayed as a measured temperature, Press the SET button, the display flashes the temperature, Press - to set the desired temperature, After setting press SET to confirm return, The controller automatically performs the relay by setting off! Lights, LED status descriptions: Indicator: Off The relay is switched off, Always indicate the relay is closed. LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Brand | CentIoT |
Part Number | SCT001-5A-5mA |
Temperature range | 40 DegreeC - + 70 DegreeC |
Current | 5 mA |
Application | Suitable for lighting equipment,AC motors,air compressors,monitoring,current measurement,and pr |
Model no | SCT001-5A-5mA |
Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
On-board micro-precision current transformer | Onboard sampling resistor
Modules 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA
Rated input current: 5A | Rated output current: 5mA | Change: 1000: 1
The linear range: 0 ~ 10A (100 ohm) | Linearity: 0.2% | Precision rating: 0.2
Uses isolation voltage: 3000V Measurement | Sealing material: epoxy resin | Operating temperature: - 40 °C- + 70 °C
Additional Information:
View Complete details
Brand | CentIoT |
Current | 100A |
Model Name/Number | SCT004-100A-SCT-013-000 |
Temperature Degree Celsius | 25 DegreeC - 70 DegreeC |
Model no | SCT004-100A-SCT-013-000 |
Part no | SCT004-100A-SCT-013-000 |
Dimension | 5.5 x 3 x 2 cm |
Weight | 63 g |
Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
Model: SCT013 Non-invasive current transformer; Current Rating: 100A
Meet UL94-V0 flame retardant properties
Two forms of output current, Voltage (voltage output built-in the sampling resistor) Non-linearity +/-3%(10%-120% rated input current)
Reference project: Open Energy Monitor Core Material: Ferrite Dielectric Strength:6000V AC/1min Anti-flaming rate: UL94-V0
Mechanical strength: opening and closing times, no less than 1000 times (20 Celsius) Opening Size: Approx. 0.51 x 0.51inch / 13 x 13mm Dielectric Strength:6000V AC/1min Working Temperature:-25-70 Celsius Cable Length: Approx. 41.37 inch / 105cm
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE163-CRASH-BLUE |
Sensor Type | Crash Collision |
Model no | SE163-CRASH-BLUE |
Dimension | 2.8 x 1.8 x 0.4 cm |
Weight | 8 g |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Brand | CentIoT |
Model Name/Number | SE007-BMP280 |
Supply Voltage | 3.3 V |
Size | 2 x 1 x 0.5 cm |
Part no | SE007-BMP280 |
Weight | 4 g |
This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter!
The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.
Typical application:Enhancement of GPS navigation e.g.time-to-first-fix improvement,dead-reckoning, slope detection Indoor navigation(floor detection, elevator detection) Outdoor navigation, leisure, and sports applications Weather forecast Health care application(e.g. spirometry) Vertical velocity indication(e.g. risk/sink speed) Target devices Handsets such as mobile phones, tablet PCs, GPS devices Navigation systems Portable health care devices Home weather stations Flying toys Watches
Specification:This is an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
This precision sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
PCB size:(L*W)1.52* 1.20cm/0.60"*0.47"
Supply Voltage: 3.3V
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE173-JSN-SR04T |
Frequency | 40 kHz |
Detection Distance | 2cm-450cm |
Dimension | 4 x 3 x 1 cm |
Model no | SE173-JSN-SR04T |
Weight | 47 g |
The JSN-SR04T is an easy to use waterproof ultrasonic distance sensor with a range of 25 to 450 cm. If you are planning to build a water level measuring system or if you need to take other distance measurements outside, then this is the sensor you need!
In this article, I have included a wiring diagram and example codes so you can start experimenting with your sensor. After each example, I break down and explain how the code works, so you should have no problems modifying it to suit your needs.
First, we will look at an example that doesn’t use an Arduino library. Next, I will cover the easy to use NewPing library that has some nice built-in features.
small size, easy to use;
low voltage, low power consumption;
high accuracy;
strong anti-jamming;
integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions.
Operating voltage: 5V; Operating current: 30 mA; Quiescent current: 5mA
Frequency: 40 kHz; Cable Length: 2.5M (meters)
Measuring range: 25-450 cm; Resolution: 2mm; Measuring angle: 45-75 degrees
Sensor dimensions: 23.5 x 20 mm, 2.5 m long cable; PCB dimensions: 41 x 28.5 mm: Mounting hole: 18 mm
Detection distance / Measuring range: 2cm-450cm.
Horizontal distance;
obstacle avoidance, automatic control;
the object approaches, there is a perceived
traffic control;
security, industrial control;
artificial intelligence, and research
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Brand | CentIoT |
Part Number | SE054-GY-291-ADXL345 |
Weight | 4 g |
Supply current | 8 mA |
Dimension | 2 x 1 x 0.5 cm |
Operating Voltage | 2.5 V to 5.5 V |
Model no | SE054-GY-291-ADXL345 |
Dimensions: 2 x 1 x 0.5 cm
Operating voltage: 2.5 V to 5.5 V
Supply current: 8mA
Output format (I2C/SPI)
Gyro: one 16-bit reading per axis
Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis
Barometer: 24-bit pressure reading (I2C only)
Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g
Magnetometer: ±2, ±4, ±8, or ±12 Gauss
Barometer: 300hPato 1110hPa
Additional Information:
View Complete details
Minimum Order Quantity: 5 Piece
Brand | CentIoT |
Part Number | SE164-GY-271-HMC5883L |
Weight | 4 g |
Supply current | 8mA |
Dimension | 2 x 1.5 x 0.5 cm |
Model no | SE164-GY-271-HMC5883L |
Operating Voltage | 2.5 V to 5.5 V |
1 x 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino
Dimensions: 22 mm × 17 mm, \
Operating voltage: 2.5 V to 5.5 V,
Supply current: 8mA
Output format (I2C/SPI):,
Gyro: one 16-bit reading per axis,
Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis,
Barometer: 24-bit pressure reading (I2C only),
Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g,
Magnetometer: ±2, ±4, ±8, or ±12 gauss,
Barometer: 300hPato 1110hPa
:
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Brand | CentIoT |
Part Number | SE172-CJMCU-105-ADXL345 |
Sensor Type | Altitude |
Dimension | 22 mm x 17 mm |
Supply current | 8mA |
Model no | SE172-CJMCU-105-ADXL345 |
1 x 10DOF L3GD20 LSM303D BMP180 Gyro Accelerometer Compass Altimeter For Arduino
Dimensions: 2 x 1.5 x 1 cm
Operating voltage: 2.5 V to 5.5 V
Supply current: 8mA
Output format (I2C/SPI): , Gyro: one 16-bit reading per axis, Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis, Barometer: 24-bit pressure reading (I2C only), Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g, Magnetometer: ±2, ±4, ±8, or ±12 gauss, Barometer: 300hPato 1110hPa
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE0042-DHT22-PCB |
Voltage | 3V--5.5V |
Model Name/Number | SE0042-DHT22-PCB |
Temperature Range | -40 DegreeC ~ 80 DegreeC |
Humidity | 0% to 99.9% |
Dimension | 2.8 x 1.2 x 1 cm |
AM2302 Humidity Capacitance Digital Temperature and Humidity Sensor is a temperature and humidity composite sensor with a calibrated digital signal output. It uses dedicated digital module acquisition technology and temperature and humidity sensing technology to ensure high reliability and excellent long-term stability. Therefore, the product has the advantages of excellent quality, fast response, strong anti-interference ability, and high-cost performance. Each sensor is calibrated in a precision humidity calibration chamber.
The calibration coefficients are stored in the OTP memory as a program, and these calibration coefficients are called internally during the processing of the detection signal. The sensor consists of a capacitive sensing element and an NTC temperature measuring element connected to a high-performance 8-bit microcontroller.
Communication with the microprocessor via a single bus requires only one line, 40 bits of data at a time, high first out. Small size, low power consumption, long communication distance, can be used in demanding applications
HVAC, dehumidifiers, testing, and inspection equipment, consumer goods, automotive, automation, data loggers, weather stations, home appliances, humidity control, medical, and other relevant humidity measurement and control.
Specification:Temperature measurement range: -40 ° C ~ 80 ° C ; Humidity measurement range: 0% to 99.9% (0°C-50°C range)
Temperature measurement error: ±0.5°C max ±1°C; Humidity measurement error: ±2%
Working voltage: 3V--5.5V
Resolution: 16 bits
Sampling period: 2s; Output signal digital signal via single-bus; Sensing element Polymer capacitor
Additional Information:
View Complete details
Brand | CentloT |
Model Number | TTP223B |
Channels | 1 |
Input Voltage | 2.5 to 3.6 V DC |
Response Time | 220 ms |
Interface | IC |
Color | Blue |
Operating Temperature | -20 to +70 deg C |
Dimensions | 24 x 24 x 8 cm |
Capacitive type touch jog switch module The module is based on a touch detection IC (TTP223). Under normal conditions, the module output low, low-power mode to mode; a touch of a finger when the corresponding position, the module will output high, the mode is switched to fast mode; when for 12 seconds without touching, the mode and switch to low power mode. The module can be installed in such as plastic, glass surface non-metallic materials, in addition to the thin paper (non-metallic) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, and other parts of the desktop button. This module allows you to remove the troubles of conventional push-type buttons.
Trigger setting mode:(1- > Short ; 0- > No Short)
AB=00: No-lock High TTL level output;
AB=01: Self-lock High TTL level output;
AB=10: No-lock Low TTL level output;
AB=11: Self-lock Low TTL level output;
IC: TTP223; Jog type: the initial state is low, high touch, do not touch is low (a similar touch of a button feature) Low power consumption
Power supply: 2 ~ 5.5V DC; Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;
Touch surface can be used as positive and negative, can replace the traditional touch of a button
Control Interface: A total of three pins (GND, VCC, SIG), GND to ground, VCC is the power supply, SIG digital signal output pin;
Touch area: Similar to a fingerprint icon inside the area, you can touch the trigger finger.
onboard TTP223 touch capacitive touch sensor IC
on-board-level status indicator
working voltage: 2.0V-5.5V
PCB board size: 15 (mm) x 12 (mm) x 7.2 (mm)
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE154-W3001-DC-12V |
Model Name/Number | SE154-W3001-DC-12V |
Voltage | 12 V DC |
Temperature Range | -50 Degree C ~ 110 Degree C |
Model no | SE154-W3001-DC-12V |
How to use:
1. Press the Show start temperature button.
2. Long press button that flashes the temperature display, press the up or down button.
3. Set the start temperature value.
4. Press the button to display the stop temperature.
5. Long push button that flashes the temperature display, press up or down.
6. Button set the stop temperature value
Power Supply: 12V DC; Power: 120W; Color of Displaying: red/blue; Sensor: NTC10K Waterproof sensor
Item Type: Digital temperature controller; Type of output: direct output; Output capacity: 10 A max
Temperature measurement range: -50 ° C ~ 110 ° C; Temperature Control Range: -50 ° C ~ 110 ° C; Temperature Control Accuracy: 0.1 ° C
Measuring input: NTC10K waterproof probe L=1 M.
Mounting hole distance: 73mm (hole distance 4mm); Size: 60 * 45 * 31mm.
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE157-W3230-DC-12V |
Model Name/Number | SE157-W3230-DC-12V |
Voltage | 12V |
Weight | 40 g |
Size | 79mm*43mm*26mm |
Dimension | 79mm*43mm*26mm |
Mini temperature controller.
With a clear LED display for better readability.
Wide temperature measuring range.
Heating or cooling control.
All parameters set can be saved after a short circuit.
Relay output.
High Control precision 0.1 centigrade
Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other
temperature-controlled system.
Note:Refer the last image for instructions/manual
Power Supply:12V DC; Color of Displaying: red/blue; Sensor: NTC10K Waterproof sensor
Output: Relay Contact Capacity 10A 220V / 20A 12V / 20A 24V
Temperature Control Range:-55°-120°; Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)
Measurement accuracy: ±0.1°C; Control accuracy: 0.1°C
Environmental requirements: -10-60°C , humidity 20%-85%RH; Dimension:79mm*43mm*26mm; Cutting Size:73mm*39mm; Sensor wire: 1 meter
Additional Information:
View Complete details
Brand | CentIoT |
Usage/Application | Temperature Measurement |
Part Number | SE159-W3230-AC-220V |
Model Name/Number | SE159-W3230-AC-220V |
Voltage | 110V - 220V |
Size | 79mm*43mm*26mm |
Mini temperature controller.
With a clear LED display for better readability.
Wide temperature measuring range.
Heating or cooling control.
All parameters set can be saved after a short circuit.
Relay output.
High Control precision 0.1 centigrade
Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other
temperature-controlled system.
Power Supply: 110V - 220V AC; Color of Displaying: red/blue; Sensor: NTC10K Waterproof sensor
Output: Relay Contact Capacity 10A 220V / 20A 12V / 20A 24V
Temperature Control Range:-55°-120°; Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)
Measurement accuracy: ±0.1°C; Control accuracy: 0.1°C
Environmental requirements: -10-60°C , humidity 20%-85%RH; Dimension:79mm*43mm*26mm; Cutting Size:73mm*39mm; Sensor wire: 1 meter
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE169-GY-85-ADXL345-HMC5883L |
Model no | SE169-GY-85-ADXL345-HMC5883L |
Operating Voltage | 2.5 V to 5.5 V |
Supply current | 8mA |
Dimension | 2 x 1.5 x 0.5 cm |
Dimensions: 2 x 1.5 x 0.5 cm
Operating voltage: 2.5 V to 5.5 V
Supply current: 8mA
Output format (I2C/SPI)
Gyro: one 16-bit reading per axis
Accelerometer: one 16-bit reading per axis
Magnetometer: one 16-bit reading per axis
Barometer: 24-bit pressure reading (I2C only)
Gyro: ±245, ±500, or ±2000°/s
Accelerometer: ±2, ±4, ±6, ±8, or ±16 g
Magnetometer: ±2, ±4, ±8, or ±12 Gauss
Barometer: 300hPato 1110hPa
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SE177-GY906-MLX90614ESF |
Sensor Type | IR Temperature |
Model no | SE177-GY906-MLX90614ESF |
Power Supply | 3 - 5 V |
MLX90614 is an Infra-Red thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning ASSP are integrated in the same TO-39 can.
With low noise amplifier, 17-bit ADC and powerful DSP unit, high accuracy and resolution of the thermometer is achieved./br> The thermometer comes factory calibrated with a digital PWM and SMBus (System Management Bus) output. As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in the range of -20…120 ??C, with an output resolution of 0.14 ??C and the POR default is SMBus.
High precision non-contact temperature
measurements; Thermal Comfort sensor for Mobile Air
Conditioning control system; Temperature sensing element for residential
commercial and industrial building air conditioning
Windshield defogging;
Automotive blind angle detection;
Industrial temperature control of moving parts;
Temperature control in printers and copiers;
Home appliances with temperature control;
Healthcare;
Livestock monitoring;
Movement detection;
Multiple zone temperature control – up to 100
sensors can be read via common 2 wires Thermal relay/alert
Body temperature measurement
Chip: MLX90614; Power supply: 3-5v (internal low dropout regulator); Small size, low cost; Easy to integrate; Automotive grade
Factory calibrated in wide temperature range: -40…+125 ??C for sensor temperature and -70…+380 ??C for object temperature.
High accuracy of 0.5°C over the wide temperature range (0..+50°C for both Ta and To)
High (medical) accuracy calibration, Measurement resolution of 0.02°C, Single and dual-zone versions, SMBus compatible digital interface, Customizable PWM output for continuous reading
Available in 3V and 5V versions, Simple adaptation for 8…16V applications, Power saving mode, Different package options for applications and, measurements versatility
Additional Information:
View Complete details
Brand | CentIoT |
Part Number | SCT002-30A-SCT-013-030 |
Model no | SCT002-30A-SCT-013-030 |
Operating temperature | 25-70 DegreeC |
Current Rating | 30A |
Dielectric strength | 6000V AC/1min |
Dimension | 5.5 x 3 x 2 cm |
Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
Model: SCT013 Non-invasive current transformer; Current Rating: 30A
Meet UL94-V0 flame retardant properties
Two forms of output current, Voltage (voltage output built-in the sampling resistor) Non-linearity +/-3%(10%-120% rated input current)
Reference project: Open Energy Monitor Core Material: Ferrite Dielectric Strength:6000V AC/1min Anti-flaming rate: UL94-V0
Mechanical strength: opening and closing times, no less than 1000 times (20 Celsius) Opening Size: Approx. 0.51 x 0.51inch / 13 x 13mm Dielectric Strength:6000V AC/1min Working Temperature:-25-70 Celsius Cable Length: Approx. 41.37 inch / 105cm
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Brand | CentIoT |
Sensor Type | Microwave radar sensor |
Sensing Distance | 7 m |
Model Name/Number | SE0031-RCWL-0516 |
Operating Temp. | -20 ~ +80 deg celsius |
Operating volatge | 4V - 28V |
Part no | SE0031-RCWL-0516 |
RCWL-0516 is a doppler radar microwave motion sensor module which can act as an alternative to a PIR motion sensor
Pin Function:3V 33.3V regulated output. Max 100mA
GND Ground OUT Trigger: high (3.3V) if motion detected 0V normally. VIN 4 - 28V
supply voltage CDSLDR 10-20k RL, U_LDR > 0.7V = On
This mini doppler radar sensor module is equipped with supporting DC 4-28V wide voltage It will automatically continuously output the high-level TTL signal when there is motion. 360 degree no blind angle detection and maximum 7m sensing distance. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
Operating Voltage: 4-28V; Operating Current: 2.8mA (typical); 3mA (max); Detection Distance: 5-9m;
Transmitting Power: 20mW (typical); 30mW (max); Output Voltage: 3.2-3.4V; Output Voltage Driving Capacity: 100mA;
Trigger Way: repeat trigger; Output Control Low Level: 0V; Output Control High Level: 3.3V; Operating Temperature: -20~80 celsius;
Storage Temperature: -40~100 celsius; Board Size: 35.9 X 17.3mm/1.41 X 0.68inch;
Additional Information:
View Complete details
Model Name/Number | M0002-2KW-SCR |
Power Consumption | 2000 W |
Brand | CentIoT |
Operating Voltage | AC 220 V |
Dimension | 91x59 (not include button) x 34 MM |
Part no | M0002-2KW-SCR |
The input is connected with the AC 220V, an output connected to the electric cooker or appliance motor, turn the knob for speed, voltage, temperature control.
Applications:Electric furnace, water heater, lamps, small motor, electric iron, etc.
Attention:Charge/load should not exceed the maximum power of 2000W, otherwise, it will burn the module and electrical appliances;
Use the resistive load as much as possible;
Reduce the capacitive and inductive load of much energy. (It is best to leave more than half of them)
Note: Due to the difference between different monitors, the image may not reflect the actual color of the item.
Specification:Operating voltage: AC 220 V
Maximum power: 2000W (resistive load connected)
Voltage Regulation: AC 0-220 V, Starts From AC 10 V
Protection: Anti-Peak, Surge, RC Absorption (EOC)
Additional Information:
View Complete details
Voltage | 24 V |
Model Name/Number | SE155-XH-W3001-24V |
Output Power | 240W |
Brand | CentIoT |
Input Voltage | 24 V |
Temperature Range | -50 DegreeC ~ 110 DegreeC |
How to use:
1. Press the Show start temperature button.
2. Long press button that flashes the temperature display, press the up or down button.
3. Set the start temperature value.
4. Press the button to display the stop temperature.
5. Long push button that flashes the temperature display, press up or down.
6. Button set the stop temperature value
power Supply: 24V DC; Power: 240W; Color of Displaying: red/blue; Sensor: NTC10K Waterproof sensor
Item Type: Digital temperature controller; Type of output: direct output; Output capacity: 10 A max
Temperature measurement range: -50 ° C ~ 110 ° C; Temperature Control Range: -50 ° C ~ 110 ° C; Temperature Control Accuracy: 0.1 ° C
Measuring input: NTC10K waterproof probe L=1 M.
Mounting hole distance: 73mm (hole distance 4mm); Size: 60 * 45 * 31mm.
Additional Information:
View Complete details
Brand | CentIoT |
Pressure Ranges | 300-1100 hPa |
Model Name/Number | SE0053-BMP180 |
Temperature | -40 to +85 DegreeC |
Usage/Application | GPS-enhancement for dead-reckoning,slope detection,etc. |
Weight | 4 g |
Part no | SE0053-BMP180 |
Dimension | 1.5 x 1.5 x 0.5 cm |
Vin: 3 to 5VDC; Logic: 3 to 5V compliant
Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
Its performance is remarkable, the absolute minimum accuracy can reach 0.03 hPa, and power consumption is extremely low, only 3 μA
Pinouts are clearly marked on reverse side of board; Up to 0.03hPa / 0.25m resolution; -40 to +85°C operational range, +-2°C temperature accuracy
Using I2C, The Device Provides Pressure And Temperature As 16Bit Values,; This board/chip uses I2C 7-bit address 0x77.
Indoor navigation
GPS-enhancement for dead-reckoning, slope detection, etc.
Sport devices, e.g. altitude profile
Weather forecast
Vertical velocity indication (rise/sink speed)
Additional Information:
View Complete details
Brand | CentIoT |
Model Name/Number | SE0040-DHT11-PCB |
Input Voltage | 3 V - 5 V |
Usage/Application | For temperature and Humidity measurements |
Material | PCB |
Part no | SE0040-DHT11-PCB |
Dimension | 3.5 x 1.5 x 0.5 cm |
Additional Information:
View Complete details
Type | Ambient Light Sensor |
Part Number | SE006-TEMT6000 |
Brand | CentIoT |
Mounting Type | PCB |
Size/Dimension | 1.5 x 1 x 0.5 cm |
Model Name/Number | SE006-TEMT6000 |
Weight | 4 g |
Chipset | TEMT6000 |
TEMT6000 Light Sensor will detect the brightness of its surroundings. While there are many properties of light that can help us categorize its brightness, the TEMT6000 measures illuminance (measured in lux (lx), often denoted Ev). Don't worry if illuminance is new to you though, the TEMT6000 is very intuitive to use: brighter = more current, darker = less current.
Specification:Chip: TEMT6000
Adapted to human eye responsivity; the Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin.
Wide-angle of half sensitivity ?? = ± 60°
SMD style package on PCB technology
Suitable for IR reflow soldering; Pinout: Black: GND; Red: VCC; Other: output
Ambient light sensor for control of display backlight dimming in LCD displays and keypad backlighting of mobile devices and in industrial on/off-lighting operation.
Automotive sensors
Mobile phones
Notebook computers
PDA’s
Cameras
Dashboards
Additional Information:
View Complete details
Brand | CentloT |
Model Number | TTP223 |
Channels | 1 |
Input Voltage | 2.0 to 5.5 V DC |
Response Time | 60 to 200 ms |
Color | Red |
Operating Temperature | -40 to +85 deg C |
Dimensions | 15 x 12 x 8 cm |
Capacitive type touch jog switch module The module is based on a touch detection IC (TTP223). Under normal conditions, the module output low, low-power mode to mode; a touch of a finger when the corresponding position, the module will output high, the mode is switched to fast mode; when for 12 seconds without touching, the mode and switch to low power mode. The module can be installed in such as plastic, glass surface non-metallic materials, in addition to the thin paper (non-metallic) covering the surface of the module, as long as the correct location of the touch, you can make hidden in the walls, and other parts of the desktop button. This module allows you to remove the troubles of conventional push-type buttons.
Trigger setting mode:(1- > Short ; 0- > No Short)
AB=00: No-lock High TTL level output;
AB=01: Self-lock High TTL level output;
AB=10: No-lock Low TTL level output;
AB=11: Self-lock Low TTL level output;
IC: TTP223; Jog type: the initial state is low, high touch, do not touch is low (a similar touch of a button feature) Low power consumption
Power supply: 2 ~ 5.5V DC; Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;
Touch surface can be used as positive and negative, can replace the traditional touch of a button
Control Interface: A total of three pins (GND, VCC, SIG), GND to ground, VCC is the power supply, SIG digital signal output pin;
Touch area: Similar to a fingerprint icon inside the area, you can touch the trigger finger.
onboard TTP223 touch capacitive touch sensor IC
on-board-level status indicator
working voltage: 2.0V-5.5V
PCB board size: 15 (mm) x 12 (mm) x 7.2 (mm)
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Model Name/Number | SE156-W3001-AC-220V |
Temperature Range | -50 DegreeC ~ 110 DegreeC |
Brand | CentIoT |
Current | 10A |
Power | 1500W |
Voltage | 220 V |
How to use:
1. Press the Show start temperature button.
2. Long press button that flashes the temperature display, press the up or down button.
3. Set the start temperature value.
4. Press the button to display the stop temperature.
5. Long push button that flashes the temperature display, press up or down.
6. Button set the stop temperature value
Power Supply: 220V AC; Power: 1500W; Color of Displaying: red/blue; Sensor: NTC10K Waterproof sensor
Item Type: Digital temperature controller; Type of output: direct output; Output capacity: 10 A max
Temperature measurement range: -50 ° C ~ 110 ° C; Temperature Control Range: -50 ° C ~ 110 ° C; Temperature Control Accuracy: 0.1 ° C
Measuring input: NTC10K waterproof probe L=1 M.
Mounting hole distance: 73mm (hole distance 4mm); Size: 60 * 45 * 31mm.
Additional Information:
View Complete details
Brand | CentIoT |
Usage/Application | Temperature Measurement |
Part Number | SE178-MLX90614ESF-IC |
Model Name/Number | SE178-MLX90614ESF-IC |
Voltage | 2.6 V - 3.6 V |
Temperature Range | 40 DegreeC ~ 85 DegreeC |
MLX90614 is an Infra-Red thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning ASSP are integrated into the same TO-39 can.
With low noise amplifier, 17-bit ADC and powerful DSP unit, high accuracy and resolution of the thermometer is achieved./br> The thermometer comes factory calibrated with a digital PWM and SMBus (System Management Bus) output. As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in a range of -20 - 120 ??C, with an output resolution of 0.14 ??C and the POR default is SMBus.
High precision non-contact temperature
measurements; Thermal Comfort sensor for Mobile Air
Conditioning control system; Temperature sensing element for residential
commercial and industrial building air conditioning
Windshield defogging;
Automotive blind angle detection;
Industrial temperature control of moving parts;
Temperature control in printers and copiers;
Home appliances with temperature control;
Healthcare;
Livestock monitoring;
Movement detection;
Multiple zone temperature control – up to 100
sensors can be read via common 2 wires Thermal relay/alert
Body temperature measurement
Sensor Type Digital, Infrared (IR); Sensing Temperature - Local- 40°C ~ 85°C; Sensing Temperature - Remote-70°C ~ 380°C (IR)
Output Type PWM, SMBus; Voltage - Supply 2.6V ~ 3.6V; Resolution16 b
Features Sleep Mode; Accuracy - Highest (Lowest)±0.5°C (±4°C)
Test Condition 0°C ~ 60°C (120°C ~ 380°C); Operating Temperature- 40°C ~ 85°C
Mounting TypeThrough Hole; Package / Case TO-39-4 Metal Can; Device Package TO-39
Additional Information:
View Complete details
Minimum Order Quantity: 20 Piece
Product Brochure
Part Number | AR093-433RF-SRX882-STX882 |
Frequency Band | 433MHz,315 MHz |
Brand | CentIoT |
Voltage | 1.2 to 12V |
Range | 10 M |
Model no | AR093-433RF-SRX882-STX882 |
STX882 is a low cost, small size, ultra-high-power, low harmonic ASK transmitter module. Has high stability and high cost, at 3.6V power to achieve 50mW, is currently on the market under the same voltage transmit power ASK transmitter module. The module can be connected to the microcontroller directly. So it is more convenient for user developing wireless products.
SRX882 is a micro power strong driving force super heterodyne receiver module. It is can support our transmitter module STX882/STX888. It has high stability, anti-interference and high cost-effective, also has a powerful driving force, certified by ROHS, FCC, CE, The module can be connected to the microcontroller directly. So it is more convenient for user developing wireless products.
Additional Information:
View Complete details
Temperature Range | 0 to 1250 deg C |
Accuracy | +/- 2.5 deg C or +/- 0.75%) |
Class | Class 2 |
Probe Material | Stainless Steel |
Model Name/Number | SE0018-MAX6675 |
Brand | CentIoT |
Application | Industrial |
Assembly | Thermocouple Probe |
Mount | Threaded |
Probe Termination | Plug |
Probe Diameter | 0.5 - 8 mm |
Probe Length | 0 - 150 mm |
Junction Type | Ungrounded |
Configuration | Simplex |
Material Grade | SS316 |
Current | 50 mA |
Dimension | 3 x 1 x 1 cm |
Country of Origin | Made in India |
MAX6675 Module + K Type Thermocouple Sensor - Cold-Junction-Compensated K-Thermocouple to-Digital Converter (0°C to +1024°C)
Operating voltage: 3. 0 ~ 5. 5V; working current 50mA; Internal integrated cold junction compensation circuit;
With a simple three serial interface; Temperature signal can be converted into 12-bit digital
Temperature resolution of: 0. 25 °C; Cold junction compensation range: - 20 ~ + 80 °C
Embedded thermocouple break detection circuitry. Using SPI 3 wire communication
K-type temperature probe Type K temperature range 0-1024 °C
Additional Information:
View Complete details