Bucketlist Trading Private Limited

The development board is based on the basic and commonly adopted ESP07 module.

• Model: ESP-07 ESP8266; ISM: 2.4GHz PA +25dBm 802.11b/g/n

• Operating Voltage3.3V

• Device: ESP8266MOD Frequency: (ISM): 2.4GHz Power: +25dBm Supported Wifi: 802.11 b/g/n Operating voltage: 3.3V

• Min Current (Sleep): 10mA Max current (connected to 802.11b network): 215mA

• Compatible with Arduino, MicroPython; Default firmware: lastest MicroPython

Additional Information:

• Item Code: E023-ESP-32-SMD
• Delivery Time: 2 - 4 days

• Chipset: ESP-12E - 802.11 b/g/n
• Integrated low power 32-bit MCU; Integrated 10-bit ADC; Integrated TCP/IP protocol stack, TR switch, balun, LNA, power amplifier and matching network, PLL, regulators, and power management units
• Supports antenna diversity Wi-Fi 2.4 GHz, support WPA/WPA2 Support STA/AP/STA+AP operation modes Support Smart Link Function for both Android and iOS devices Support Smart Link Function for both Android and iOS devices
• SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIOSTBC, 1x1 MIMO, 2x1 MIMOA-MPDU & A-MSDU aggregation and 0.4s guard interval
• Compatible with Arduino, MicroPython; Default firmware: lastest MicroPython

Additional Information:

• Item Code: E021-ESP-12E-SMD
• Delivery Time: 2 - 4 days

The ESP8266 WiFi Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.

• ESP-01 Espressif Chipset, 802.11 b/g/n

• Wi-Fi Direct (P2P), soft-AP

• Integrated TCP/IP protocol stack

• Integrated TR switch, balun, LNA, power amplifier and matching network

• Integrated PLLs, regulators, DCXO and power management units

Additional Information:

• Item Code: E001-ESP-01-SERIAL-WIFI
• Delivery Time: 2-4 days

ESP8266 is high integration wireless SOCs, designed for space and power-constrained mobile platform designers. It provides an unsurpassed ability to embed Wi-Fi capabilities within other systems or to function as a stand-alone application, with the lowest cost, and minimal space requirement.

• Chipset: ESP-12F - 802.11 b/g/n

• Integrated low power 32-bit MCU; Integrated 10-bit ADC; Integrated TCP/IP protocol stack, TR switch, balun, LNA, power amplifier and matching network, PLL, regulators, and power management units

• Supports antenna diversity Wi-Fi 2.4 GHz, support WPA/WPA2 Support STA/AP/STA+AP operation modes Support Smart Link Function for both Android and iOS devices Support Smart Link Function for both Android and iOS devices

• SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIOSTBC, 1x1 MIMO, 2x1 MIMOA-MPDU & A-MSDU aggregation and 0.4s guard interval

• Compatible with Arduino, MicroPython; Default firmware: lastest MicroPython

The only difference between ESP-12E and ESP-12F is the layout of the PCB antenna. The ESP12F has an optimized antenna.

Additional Information:

• Item Code: E022-ESP-12F-SMD
• Delivery Time: 2 - 4 days

Using Introduction: NRF24L01 wireless module (needs to purchase separately) and USB interface connection SWIM interface is used to configure receiving and sending mode, defaults set sending mode. When using it, short circuit GND and SWIM interface can switch mode

• Onboard Chip: adopt CH340 to serial port chip, and it has stable performance and excellent compatibility

• Transmission Distance: 100-1100m

• Bidirectional Communication: it can let two or one computers achieve bidirectional communication, and let one computer to one MCU or multiple MCU achieve bidirectional communication, it needs switching in the corresponding mode to use

• The package contains only the USB adapter, please purchase NRF24L01 Module separately

• The NRF24L01 module is set to default to sending mode, change the mode to Switch mode for the adapter to work.

Additional Information:

• Item Code: AR047-NRF24L01-USB-ADAPTER
• Delivery Time: 2 - 4 days

• This ESP8266 Serial Port To Wi-Fi Module, FL-M1S  serial transceiver module, based on ESP8266 SoC with an integrated TCP/IP protocol stack It can either host the application or offload all Wi-Fi networking functions from another application processor.

  ESP8266 has powerful onboard processing and storage capabilities allowing it to integrate with sensors and other devices through GPIOs with minimal development up-front and minimal loading during runtime.

  Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including the front-end module, is designed to occupy minimal PCB area.

  Add Wi-Fi connectivity to your projects quickly, easily and painlessly! The ESP8266 is a highly integrated chip designed for the needs of any IoT project. It offers a complete and self-contained Wi-Fi networking solution. Allowing it to either host a small application or to offload all Wi-Fi networking functions from another MCU.

  This module is a WiFi serial transceiver module, based on ESP8266 SoC with an integrated TCP/IP protocol stack. As a TTL ‘Serial to Wireless Internet’ device, this module easily interfaces with typical microcontrollers (MCU) to communicate via TTL serial to instantly add Wi-Fi connectivity. It runs off 3.3V, and can draw almost 500mA of current for up to a really impressive +19.5dBm output power in 802.11b mode! That gives this module a range over a hundred meters!

  ESP8266 has powerful onboard processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during run-time. Its high degree of on-chip integration allows for minimal external circuitry.

• ESP-01 Espressif Chipset, 802.11 b/g/n; Upgraded Antennae FL-M1S
• Wi-Fi Direct (P2P), soft-AP
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLLs, regulators, DCXO and power management units

Additional Information:

• Item Code: E018-ESP-01-SERIAL-WIFI-FL-M1S
• Delivery Time: 2 - 4 days

• ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area.

• This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power, and RF properties best, which is safe, and scalable to a variety of applications. 

• This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power, and RF properties best, which is safe, and scalable to a variety of applications

• Easily embedded to other products Strong function with support LWIP protocol

• Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develop

High performance, easily embedded to other products Strong function with support LWIP protocol. Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develop.

Additional Information:

• Item Code: E032-ESP32-CP2102
• Delivery Time: 2 - 4 days

ESP32-WROVER is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.

This module is provided with a PCB antenna, ESP32-WROVER features a 4 MB external SPI flash and an additional 8 MB SPI Pseudo static RAM (PSRAM).

Compatible with Arduino, MicroPython
Default firmware: lastest MicroPython

• Espressif official ESP32-WROVER module; MicrocontrollerESP-32; Memory: 4MB FLASH; 4MB PSRAM
• TF (Micro SD) Card slot, support SPI mode; LOLIN I2C port; LOLIN TFT port;
• Lithium battery interface, 500mA Max charging current; Supported BatteriesLipo Battery 3.7V; Operating Voltage3.3V; Battery Connector: PH-2 2.0mm
• Board Power Supply (USB)5V; Clock Speed(Max)240Mhz
• Digital I/O Pins22; Analog Input Pins6 (VP, VN, 32, 33, 34, 35); Analog Output Pins2 (25, 26); LED_BUILTIN5; All of the IO pins run at 3.3V

Additional Information:

• Item Code: E014-D32_PRO_2.0.0
• Delivery Time: 2 - 4 days

The development board is based on the basic and commonly adopted ESP32 module with ESP32-D0WDQ6 chip on board. Dimensions: Length 57mm x Width 25.4 mm; Weight 6.1g The module uses ESP32-D0WDQ6 Dual-core microprocessor chip

• Espressif official ESP32-WROOM-32 module; Microcontroller ESP32-D0WDQ6 Dual Core; ESP32 Version: REV1

• Board Power Supply (USB)5V; Supported BatteriesLipo Battery 3.7V; Operating Voltage3.3V

• Clock Speed(Max)240Mhz; Flash: 4MB or 32mb (4 MegaByte = 32 megabit)

• Digital I/O Pins22; Analog Input Pins6 (VP, VN, 32, 33, 34, 35); Analog Output Pins2 (25, 26); LED_BUILTIN5

• Compatible with Arduino, MicroPython; Default firmware: lastest MicroPython

Additional Information:

• Item Code: N0001-ESP32-LOLIN
• Delivery Time: 2 - 4 days

• Product description:

  The nRF24L01+ is a single-chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurstTM), suitable for ultra low power wireless applications. The nRF24L01+ is designed for operation in the worldwide ISM frequency band at 2.400 - 2.4835GHz. You can operate and configure the nRF24L01+ through a Serial Peripheral Interface (SPI). The register map, which is accessible through the SPI, contains all configuration registers in the nRF24L01+ and is accessible in all operation modes of the chip.

  The radio front end uses GFSK modulation. It has user-configurable parameters like frequency channel, output power, and air data rate. nRF24L01+ supports an air data rate of 250 kbps, 1 Mbps and 2Mbps. The high air data rate combined with two power saving modes make the nRF24L01+ very suitable for ultra-low-power designs.nRF24L01+ is drop-in compatible with nRF24L01 and on-air compatible with nRF2401A, nRF2402, nRF24E1 and nRF24E2. Intermodulation and wideband blocking values in nRF24L01+ are much improved in comparison to the nRF24L01 and the addition of internal filtering to nRF24L01+ has improved the margins for meeting RF regulatory standards. Internal voltage regulators ensure a high Power Supply Rejection Ratio (PSRR) and a wide power supply range.

  Specification:

  • Model: nRF24L01+

  • Data Rate: 250kbps, 1Mbps, and 2Mbps on-air data rates, Ultra-Low Power Operation, 11.3mA TX at 0dBm Output Power

  • 13.5mA RX at 2Mbps air data rate

  • Supply Range: 1.9 to 3.6V

  • +/- 60ppm 16MHz crystal, 5V tolerant inputs

Additional Information:

• Item Code: AR045-NRF24L01
• Delivery Time: 2 - 4 days

NRF24L01 wireless module operating voltage is generally 3.3v, while the ordinary microcontroller board is operating at 5V. This module will convert the 5V to 8V microcontroller signal to 3.3v signal. The adapter is fully compatible with Arduino, raspberry pi and other commonly available microcontroller development boards. The module comes with an M3 fixing screw mounting hole for easy installation Note: This adapter is not compatible with esp8266 or any other esp based wifi chipset. The package contains only the adapter board, it does not include the nrf24l01 wifi module.

• 8-pin NRF24L01 wireless module can be directly inserted in a female header. With AMS1117 3.3V stable chip, no bother with voltage conversion

• Using instruction: VCC on the module is connected with a power source, GND connected to ground, CE, CSN, SCK, MISO, MOSI, and IRQ six input terminals connect with I/O ports sequentially

• Supply voltage input range: DC 5 – 8V;

• With LED power indicator, convenient to show the status of the power supply

• Applied with two-layer PCB board production process, premium, and high quality

Additional Information:

• Item Code: AR043-NRF24L01-ADAPTER
• Delivery Time: 2 - 4 days

• This wireless Transceiver module is an easy and suitable module if you want to set up your wireless communication system at a low cost.

• It can achieve a good balance between wireless transition performance and cost. You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system.

• What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters. (No barrier)

• Frequency: 2.4GHz~2.5GHz

• Operating voltage: 3 ~ 3.6V

• Max Current: 115mA

• Multi-frequency: 125 frequency Support up to six channels of data reception

• Part List: 1 x NRF24L01+PA+LNA wireless module 1 x SMA Antenna Center frequency:2.4GHz

• Measured distance:1300m

• Max power:100mW

• component source: imported components

• With shielding cover, Strong anti-interference force performance parameters:

• Module Siz: 18*33mm

• Interface method:2*4*2.54mm can use a universal board or Dupont Line

• Power Supply:2.0V——3.6VDC

• Measured distance:1300m

• Communications levels:0.7VDD——5.2VDC

• Maximum power:20dBm about 100mW

• Gbps:50k,1M,2M, Adjustable

• Emission current:95mA

• Sinks current:20mA

• Communication interface: Standard SPI mode

• Transceiver length: single packet:1—32 bytes;

• 3 FIFO buffer RSSI support:

• Does not support the true meaning of RSSI, Only supports packet loss statistics

• Working temps:-30 -85 °C

• Storage Temp:-40 - 125 °C

• Operating frequency:2400MHz-2525MHz1MHz step

• Receiving Sensitivity:-106dBm/250Kbps -96dbm/1Mbps -92dbm/2Mbps

Additional Information:

• Item Code: RF026-nRF24L01P-PA-LNA
• Delivery Time: 2 - 4 days

• Espressif official ESP32-WROOM-32 module; Microcontroller ESP32-D0WDQ6 Dual Core; ESP32 Version: REV1
• Board Power Supply (USB)5V; Supported BatteriesLipo Battery 3.7V; Operating Voltage3.3V
• Clock Speed(Max)240Mhz; Flash: 4MB or 32mb (4 MegaByte = 32 megabit)
• Digital I/O Pins22; Analog Input Pins6 (VP, VN, 32, 33, 34, 35); Analog Output Pins2 (25, 26); LED_BUILTIN5
• Compatible with Arduino, MicroPython; Default firmware: lastest MicroPython               

Additional Information:

• Item Code: E013-D32_1.0.0
• Delivery Time: 2 - 4 days

Nodemcu breadboard-friendly model with ESP8266 chip. The development kit based on esp8266 integrates gpio, PWM, iic, 1-wire, and ADC all in one board.

• The Development Kit based on ESP8266 integrates GPIO, PWM, IIC, 1-Wire, and ADC all in one board.

• Power your development in the fastest way in combination with NodeMCU Firmware!

• CP2102 based USB-TTL included plug&play

• 10 GPIO, every GPIO can be PWM, I2C, 1-wire

• PCB antenna

Additional Information:

• Item Code: ESP001-AMICA
• Delivery Time: 2 - 4 days