Bucketlist Trading Private Limited

Alligator Clip Test Lead can be used in electrical or laboratory electric testing work. Color-coded leads allow you to test circuits without crossing wires or causing shorts. It can be used as low voltage jumper leads. Package: 2 x Yellow Alligator Clip Test Lead 2 x Black Alligator Clip Test Lead 2 x Green Alligator Clip Test Lead 2 x Red Alligator Clip Test Lead 2 x white Alligator Clip Test Lead

• Clip Size : 5.3 x 1.5 x 1.2cm/2.1" x 0.6" x 0.5" (L*W*H) (including insulation)
• Total Length : 50cm/20" (1.6 Ft);
• Color: Yellow, Black, Green, Red, White (5 colors)
• Color choice may vary based on availability; Quantity: 2pcs on each color, total 10pcs for the whole set
• Material : Metal, Soft Plastic

Additional Information:

• Item Code: C0011-10PCS-DEND-ALLI
• Delivery Time: 2 - 4 days

•  Professional grade non-return valve - Ideal for marine, automotive, caravans/RV, and agriculture Arrow marked on valve, showing fluid flow direction, Prevents fuel from returning back to the tank and keeps it in the line.

• Easy to install, no assembly required

• It can be used on any UTV, Side by side, Quad, Dirtbike, Jetski, Waverunner, Boat, Truck, Car, Motorcycle, Tractor, Camper, Lawn Mower, Blower, Pressure washer, etc.

• Note: Please allow 3-5 mm error due to manual measurement Package Included: 1 x one-way check valve

• Color: Transparent 

• Material: Plastic

• Hose size: 12mm (for hose with 12mm inner diameter)

• Opening pressure: >0.015MPA

• Compatible: Suitable for water, petrol, diesel, oils and other fluids

• Size Available: 4mm/6mm/8mm/10mm/12mm

Additional Information:

• Item Code: HC097-12MM-ONEWAY-VALVE-TP
• Delivery Time: 2 - 4 days

•  Professional grade non-return valve - Ideal for marine, automotive, caravans/RV, and agriculture Arrow marked on valve, showing fluid flow direction, Prevents fuel from returning back to the tank and keeps it in the line.

• Easy to install, no assembly required

• It can be used on any UTV, Side by side, Quad, Dirtbike, Jetski, Waverunner, Boat, Truck, Car, Motorcycle, Tractor, Camper, Lawn Mower, Blower, Pressure washer, etc.

• Note: Please allow 3-5 mm error due to manual measurement Package Included: 1 x one-way check valve

• Color: White

• Material: Plastic

• Hose size: 12mm (for hose with 12mm inner diameter)

• Opening pressure: >0.015MPA

• Compatible: Suitable for water, petrol, diesel, oils and other fluids

• Size Available: 4mm/6mm/8mm/10mm/12mm

Additional Information:

• Item Code: HC091-10MM-ONEWAY-VALVE-WP
• Delivery Time: 2 - 4 days

Description:

Hard plastic T-type connector.

Stripped and tinned leads, 1 red and 1 black for easy identification and soldering Snap-on terminal connector for 9-volt battery or for DIY projects. 
Plug Type: 2. 1 x 5. 5mm Male to 9V Battery Clip
Material(External): PVC Plastic
Color: Black, Red
Size: Approx. 13. 2*2. 6 *0. 9cm / 5. 20*1. 02*0. 35inch

Package Includes:

9V Battery Clips (9V battery is not included). 

• Material(External): PVC Plastic
• Hard plastic T-type connector
• Stripped and tinned leads, 1 red and 1 black for easy identification and soldering Snap-on terminal connector for 9-volt battery or for DIY projects
• Plug Type: 2. 1 x 5. 5mm Male to 9V Battery Clip

Additional Information:

• Item Code: C0012-9V-SNAP-DC-5PCS
• Delivery Time: 2 - 4 days

• Model: MB-102
• Dimension: 16.7 x 5.7 x 1cm
• Tie Points: 830 tie points (consists of: 630 tie-point terminal strip, 200 tie-point distribution strips)
• Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
• Wire size: Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires

Additional Information:

• Item Code: AR051-MB102-830
• Delivery Time: 2 - 4 days

• Type: T model. Lines: 2. Soft plastic Buckle T-type connector.
• Stripped and tinned leads, 1 red and 1 black for easy identification and soldering Snap-on terminal connector for 9-volt battery or for DIY projects.
• 9V Battery Clip Material(External): PVC Plastic
• Buckle Line Interface Material: tinned copper buckle 7*0.12. Length of lines: 15cm.
• Side B: Open cable suitable for soldering.

Additional Information:

• Item Code: C0014-9V-SNAP-10PCS-OPEN
• Delivery Time: 2 - 4 days

• Type: Standard USB Type A Male Plug Connector with Plastic Covers
• Material: ABS Plastic
• Color: Black
• Pin: Nickel Plated Steel Pin
• Shape: rectangle               

Additional Information:

• Item Code: U011-USBA-MALE-10PCS
• Delivery Time: 2 - 4 days

• Each order comes with a 40 pin ribbon cable and assembled T Type Plus GPIO Expansion Board.

• You can plug the 40 pin GPIO cable between the Pi computer and the T Type Plus GPIO expansion board This GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little easier to read the labels

• 1pcs GPIO 40P Breakout Board For Raspberry Pi 2 Model B & B+

• 1pcs 20cm FC40 40pin Flat Rainbow Ribbon Cable

• T type design, convenient to used for GPIO converter of demo board, breadboard and so on

• 40 pin design, suitable for many development boards, such as for orange pi, raspberry pi

• Cable: Connector TypeFemale to Female IDC Connectors

• Cable: Withstand Voltage300V; Temperature105C; Pin Number40 Pin; Pin Pitch2.54mm; Wire Range28AWG; Length48cm/19"; Width5cm/2";

• NOTE: Raspberry Pi development board is not included.

Additional Information:

• Item Code: R002-R004-40PIN-SET-BLUE
• Delivery Time: 2 - 4 days

• Each order comes with a 40 pin ribbon cable and assembled T Type Plus GPIO Expansion Board.

• You can plug the 40 pin GPIO cable between the Pi computer and the T Type Plus GPIO expansion board This GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little easier to read the labels

• 1pcs GPIO 40P Breakout Board For Raspberry Pi 2 Model B & B+

• 1pcs 20cm FC40 40pin Flat Rainbow Ribbon Cable

• T type design, convenient to used for GPIO converter of demo board, breadboard and so on

• 40 pin design, suitable for many development boards, such as for orange pi, raspberry pi

• Cable: Connector TypeFemale to Female IDC Connectors

• Cable: Withstand Voltage300V; Temperature105C; Pin Number40 Pin; Pin Pitch2.54mm; Wire Range28AWG; Length48cm/19"; Width5cm/2";

• NOTE: Raspberry Pi development board is not included.

Additional Information:

• Item Code: R002-R003-40PIN-SET-RED
• Delivery Time: 2 - 4 days

• The contact resistance of 500 Insulation resistance 100M Key

• Operating Force 150-200N

• Rebound time 1 (ms) Life of 100 million (times)

• Circuit Rating: 35V (DC), 100mA, 1W

• Contact resistance: 10Ω ~ 500Ω (Varies according to the lead lengths and different from those of the material used) 

• Insulation resistance: 100MΩ 100V

• Dielectric Strength: 250VRms (50 ~ 60Hz 1min)

• Electric shock jitter: <5ms

• Life span: tactile type: ≥ one million times

• Operating pressure: Touch feeling: 170 ~ 397g (6 ~ 14oz)

• Switch travel: touch-type: 0.6 ~ 1.5mm

• Environment parameters:

• Operating temperature: -40 to +80 °C

• Storage temperature: -40 to +80 °C

• Temperature: from 40,90% to 95%, 240 hours

• Vibration: 20G, max. (10 200Hz, the Mil-SLD-202 M204.Condition B)

• Peel off the white sticker on the back of the keyboard can be securely affixed to the surface of the chassis.

• Connector: Dupont 8 pins, 0.1" (2.54mm) Pitch.

• Peel off the white sticker on the back of the keyboard can be securely affixed to the surface of the chassis.

• Operation Temperature: -20 to +40 °C

• Life Expectancy: 1 million closures

Additional Information:

• Item Code: AR011-4X4-KEYPAD-1PCS
• Delivery Time: 2 - 4 days

• It has good conductivity and a wide service temperature range( -60~ 200 °C), short term 300 high temperature.

• The surfaces curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent-free.

• It can be applied safely in elastic adhesion, heat dissipation, insulation, and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.

• It is suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.

• Thermal properties, strong adhesion.

• Thermal conductivity: > 0.671W/m-K Thermal

• Net Weight: 5g; Active use period: 10 (min); Shelf life: 12 (months)

• Strength of connected buildings: 1.5map

• Surface curing time: 10MIN/25

• When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.

• The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.

• Recommended coating thickness: 0.1-0.5mm, the thinner the better.

• Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.

Additional Information:

• Item Code: HC013-THERMAL-PASTE-5G
• Delivery Time: 2 - 4 days