Bucketlist Trading Private Limited

Input voltage range: 6V-32V: Output: Four USB ports Type A Fast charging port
Output voltage: Default 5V, automatically adjust between 3-12V after fast charge activation
Output power: Up to 24W (5V / 3.4A, 9V / 2.5A, 12V / 2A, etc.); Conversion efficiency: 90% -97%
Quick charge support agreement Support DCP protocol, BC1.2, , protocol Support Fast Upload / SCP Protocol Support Protocol Fast Charge Support Spreadtrum Protocol Fast Load SFCP Qualcomm QC2.0 and 3.0 support MTK support PE1.1 / PE2.0
Overvoltage input and undervoltage protection; Input overcurrent protection; Maximum output current, short circuit protection Machine over temperature protection

Additional Information:

• Item Code: BM1231-IP6505-4USB
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: 9 x 4.5 x 0.8 Centimeters

Input voltage range: 6V-32V; Output: Single port TYPE A USB Fast Charging
Output voltage: Default 5V, automatically adjust between 3-12V after fast charge activation
Output power: Up to 24W (5V / 3.4A, 9V / 2.5A, 12V / 2A, etc.); Conversion efficiency: 90% -97%
Quick charge support agreement Support DCP protocol, BC1.2, , protocol Support Fast Upload / SCP Protocol Support Protocol Fast Charge Support Spreadtrum Protocol Fast Load SFCP Qualcomm QC2.0 and 3.0 support MTK support PE1.1 / PE2.0
Overvoltage input and undervoltage protection; Input overcurrent protection; Maximum output current, short circuit protection Machine over temperature protection

Additional Information:

• Item Code: BM1229-IP6505-1USB
• Production Capacity: 1000
• Delivery Time: 15-20days

Semiconductor cooling plate: TEC1-04901
External dimensions: 20X20MM; Thickness: 3 to 5mm
Rated Voltage: 4V-5.8V; Operating current: Imax = 1A
Temperature Difference ΔTmax(℃)：60 degree Celsius
Cooling power: 3.5W; Packaging Process: 4-week standard 704 silicone rubber seal (regular)

Additional Information:

• Item Code: TEC1-04901-20X20
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: 20L x 20W x 5H Millimeters

Amplifier chip: TDA7850;
Output power: 4 x 80w
Channels: 4 Inputs and 4 Outputs
Power input: DC12V, Recommended DC voltage 12V, current above 20A
Frequency response: 20Hz-20KHz; Power efficiency > 90%
Match speakers: 4-8Ω, 100-200W, 4-12 inch speaker; 4ohms recommended

Additional Information:

• Item Code: AU055-TDA7850-4X50W
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: 4-12 inch

PAM8620 power amplifier board Class D
Working power supply: DC8-26V
Output power: 2x15W stereo (24V/8 Ohm); Support speaker: 2/4/6/8 ohm speaker; Differential Output selectable by Jumper
Input mode: audio input/3.5MM audio input/3P-2.54mm terminal audio input; Differntial input.
Efficiency: >90%; Total harmonic distortion plus noise: <0.2%; Gain: 32db

Additional Information:

• Item Code: AU092-PAM8620-2X15W-DIF
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: 7.6 x 4.2 x 1.7 Centimeters

15-W/ch 8-Ω Load and 30-W into a 4-Ω Mono Load at 10% THD+N 16V Supply
10-W/ch 8-Ω Load at 10% THD+N 13V Supply
90% Efficient Class-D Operation Eliminates Need for Heat Sinks
Wide Supply Voltage Range Allows Operation From 8 V to 26 V
Filter-Free Operation; SpeakerGuard Speaker Protection Includes DC Protection
Robust Pin-to-Pin Short Circuit Protection and Thermal Protection With Auto Recovery Option
Excellent THD+N / Pop-Free Performance;

Additional Information:

• Item Code: AU069-TPA3110-2X15W
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: 55D x 45W x 14H Millimeters

Amplifier chip: TPA3116D2; Dual-core chips
Output power: 100Wx2; Protection mechanism: overheat, overcurrent, and short circuit protection
Channel Type: 2.0 Stereo; Audio input: Send 3PIN shielded cable
Power input: DC12V-24V, Recommended DC voltage 12V, current above 15A
Frequency response: 20Hz-20KHz; Input Impedance: 51Kx2
Match speakers: 4-8Ω, 15-50W, 3-10 inch bookshelf speakers, floor speakers.

Additional Information:

• Item Code: AU084-TPA3116D2-2X100W
• Production Capacity: 1000
• Delivery Time: 10-20 Days
• Packaging Details: 10.5 x 6.5 x 3.5 Centimeters

Amplifier chip: TPA3116D2; with Base, Treble and midrange tone adjustment, use along with speaker protection board to avoid pop sound during power on/off, or tone down the volume to zero before power on/off.
Output power: 2 × 50 W Into a 4-Ω BTL Load at 21 V; 2 × 30 W Into a 8-Ω BTL Load at 24 V; 2 × 15 W Into a 8-Ω BTL Load at 15 V
Channel Type: 2.0 Stereo; Add additional heatsink, if intend to use for 50W capacity, existing heatsink only usefull upto 15W per channel
Power input: DC12-24V, Recommended DC voltage 12V, current above 5A
Frequency response: 20Hz-20KHz; Power efficiency > 90%
Match speakers: 4-8Ω, 100-200W, 4-12 inch speaker; 4ohms recommended

Additional Information:

• Item Code: AU064-TONE-50W-2CH
• Production Capacity: 1000
• Delivery Time: 10-20 Days
• Packaging Details: 9.9 x 3.3 x 3 Centimeters

Power Supply Voltage: 12 to 24V DC, 24VDC Recommended
35 W true RMS power into a 4 ohm load at THD = 0%, VS = ±18 V, f = 1 kHz and up to 32 W into an 8 ohm load at THD = 10%, VS = ±22 V, f = 1 kHz.
Audio Input: Mono ; Audio Output: Mono
Output Peak Current: 3A; Recommended: 1.5A @ 24V, 2.5A @ 12V

Additional Information:

• Item Code: AU113-TDA2050-35WX1
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: 7.8 x 3.2 x 1.6 Centimeters

Charge voltage : DC 4.5V-8V(Recommend DC 5V), Full charge voltage : 4.2V+-2%.
Charging current : 0-1A, (Boost in) Discharge current : 0-2A; (Boost in)Discharge quiescent current : 450uA:
Led indicator : "OK" LED is fully charged OR battery failure status indicator; "CR" LED is charge status indicator
(Boost in) Discharge conversion efficiency : 78%-90%
(Boost out) Output current : 0-0.66A(9V)

Additional Information:

• Item Code: BM33-DD05CVSA-6V
• Production Capacity: 1000
• Delivery Time: 15-20days
• Packaging Details: ‎6 x 4 x 1 cm; 4 g

IC: TTP223B; Jog type: the initial state is low, high touch, do not touch is low (similar touch of a button feature) Low power consumption
Power supply: 2 ~ 5.5V DC; Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;
Touch surface can be used as positive and negative, can replace the traditional touch of a button
Control Interface: A total of three pins (GND, VCC, SIG), GND to ground, VCC is the power supply, SIG digital signal output pin;
Touch area: Similar to a fingerprint icon inside the area, you can touch the trigger finger.

Input Voltage : 4.5~28V; Do not adjust the potentiometer without load (atleast light load)
Output voltage : 0.8V~20V ; Output Current : 3A(Max)
Switch Frequency : 1.5MHz(Max),1MHz(Typ)
Operating Temperature : -20 to +85
Efficiency : 92%(Max)

220V cycle on/off relay module; With start/stop function, the module enters the infinite loop mode after starting, and the relay works on and off according to the set time.
Voltage: AC 100V-250V, can be used for 100V/110V/120V/127V/220V/230V/240V mains.; Power consumption: <1.0W; Output: Active output with the same output voltage as the input voltage. Do not exceed 10A at most.
Output: Active output with the same output voltage as the input voltage. Do not exceed 10A at most.; Life: 100,000 movements
Input: Passive switch input, the green light will be on first after starting, and will stay in red after stopping.; Time range: 0.5 seconds - 1000 minutes; Time accuracy: Range maximum * 0.001, ie 1000 resolution.
Input (start button): Passive switch input, the green light will be on first after starting, and will stay in red after stopping. It is not necessary to start the input. You can short the two terminals with wires, so that the power will start to cycle indefinitely without buttons.

Additional Information:

• Item Code: SWD004-T-DLY-QF-RD72
• Production Capacity: 1000
• Delivery Time: 10-20 Days

Dual-panel wiring, properly solve the crosstalk between the ground potential balance and channel wiring
Unique without LC filter Class D digital power board, and can be used directly to the computer's USB powered.
Two-channel stereo, 5V power supply can output 3W +3 W power, can directly drive 4 8 small speaker output power, full of energy, good sound quality.
Excellent noise suppression in the case is not connected to the input audio, the ear close to the speaker can not hear any noise
Advanced Micro Devices, volume: 1.85 * 2.11cm

Additional Information:

• Item Code: AU002-PAM8403-P
• Production Capacity: 50
• Delivery Time: 10-20 Days
• Packaging Details: 35 x 30 x 10 Millimeters

Input voltage : DC 6 ~ 35V; Max input current : 10A ( long hours , please leave a certain margin )
Max input power : 200W ( 30V input voltage is greater than the maximum power is reached )
Output voltage : DC 6 ~ 55V ( Note : This board is a booster plate , the output voltage can be greater than or equal to the input voltage ); Max output current : 7A (Working long hours , please leave a certain margin )
Conversion efficiency : 97.6% ( input 32V output 45V / 3A when measured , the efficiency with input voltage and output voltage and current related )
Module size : 70x39x32 mm ( length x width x height )

Additional Information:

• Item Code: DC088-200W-10A-BOOST
• Production Capacity: 1000
• Delivery Time: 10-20 Days
• Packaging Details: 7 x 3.9 x 3.2 Centimeters